Notice: As the couplant and battery are sensitive items, in order to save the freight and facilitate your customs clearance, we will remove the batteres and couplant before delivery, you can buy the couplant locally and put it in the container equipped in the packing box. Please be cautious to place order if you mind this.
Ultrasonic Thickness Gauge Application
In many industries, It is essential to mesure the wall thickness to confirm the condition of the material for the normal running of the items or structure safety. LS211 ultrasonic thickness meter can be widely used in testing the thickness of various accessories or metallic structure to check them whether to be repaired or changed such as ships, tanks, pipes or steel structure. The gauge is applicable for petroleum, chemical, metallurgical, shipbuilding, aviation and aerospace various fields.
1. Excellent Timer chips provide fast, accurate readings
LS211 ultrasonic thickness gauge calculates the material thickness by sound velocity and the time taken between the emitted pulse and the detected echo, a precision timing chip can bring the user the accurate time to get the accurate data
2. Ultrasonic double crystal probe
The gauge probe employs a double crystal transducer consisted of two independent crystals separated by an acoustic barrier. One crystal sends ultrasonic pulses, and another is responsible for receiving them. The probe is highly sensitive and can effectively reduce clutter, and the probe housing is made of stainless steel, which is hard and durable
3. Automatic Gain switchable
Some materials are good conductors of sound and some are not. For the latter, the meter can switch the Gain freely which is to amplify the ultrasonic signal so that the emitted pulse is accurately captured by the transducer as it propagates, and obtains accurate data
4. Two measurement modes: QC Mode/Statistics Mode
LS211 ultrasonic thickness tester features two measurement mode: QC mode and statistics mode. Allowing to set upper and lower limits to check the problem areas by prompting NG under the QC mode. It will count maximum, minimum and average values of data in Statistics mode.
5. Built-in sound velocity of multiple materials
LS211 already contains the velocities of several common metallic (such as iron, copper, aluminum) and non-metallic materials (plastics, ceramics, plexiglass) as well as other objects and the user are not required to find them separately
6. Sound velocity can be measured according to thickness
The tester can reverse the sound velocity of the material based on the known thickness and measurement results. And the instrument can test irregular materials of the same components as the materail whose thickness can be measured
7. Large measuring range of thickness
With a wide mesuring range of material, the LS211 can detect materials from as thin as 0.8 mm to 600 mm. Its resolution can reach to 0.001mm when measuring the objects 0.8mm-10mm
Paramenters
|
Parameter
|
Value
|
|
Measuring Range
|
0.8-600mm(45#steel)
|
|
Resolution
|
0.8-10mm:0.001mm
10-100mm:0.01mm 100-600mm:0.1mm |
|
Accuracy
|
0.8-10mm:±0.05mm
10-600mm:±0.5% reading |
|
Sound Velocity Range
|
1000~9999m/s
|
|
Probe
|
5MHz φ10 double-crystal probe
|
|
Display
|
240 * 160 dot matrix LCD
|
|
Unit
|
mm/inch
|
|
Power Supply
|
2pcs of 1.5V AAA alkaline battery
|
|
Host Size
|
142 * 72 * 28 mm
|
|
Weight
|
About 230g
|
|
Operation Temperature Range
|
-10~50℃，0~85%RH（No condensation）
|
|
Storage Temperature Range
|
-10~60℃，0~85%RH（No condensation）
|
Reviews
There are no reviews yet.